Analysis of the reasons why the folding machine does not fold, the folding machine malfunctions occasionally during use, but it is a nightmare for people who do not understand the solution. Failure to repair the folding machine will not only lead to a reduction in output, but also directly cause it Defective product. So how should we quickly deal with the failure of the folding machine not to fold, let's take a look at it together.

Mask folding machine failure:

　　 1. It can't be turned on, the machine has no power (the display operation screen has no power), there are generally two reasons. First, there may be a problem with the power cord. Use a tester to check the power cord and replace it if it is broken. Second, it may be that the fuse on the power switch is burned out, and it can be solved by directly replacing the fuse.

　　2. The machine is not running and the operation alarm is displayed. In one case, the emergency stop button is turned on. Just reset the emergency stop button. In another case, the safety cover is opened. Close the safety cover and the problem will be solved.

　　3. The mask cannot be folded, causing the folding machine to fail to fold. The mask may not be placed neatly, or the machine hardware problem, check whether the infrared sensor is offset; check whether the folding machine parameters are set correctly.

　　Other folding machine failure:

　　 1. There is no power supply for the machine (there is no power supply for the display operation screen), generally there are two reasons. First, there may be a problem with the power cord. Use a tester to check the power cord and replace it if it is broken. Second, it may be that the fuse on the power switch is burned out, and it can be solved by directly replacing the fuse.

　　 2. The machine is not running and the operation alarm is displayed. In one case, the emergency stop button is turned on. Just reset the emergency stop button. In another case, the safety cover is opened. Close the safety cover and the problem will be solved.

　　 3. Machine running and alarm display on the operation screen are generally caused by motor overload. Check the air switch and the inverter. If there is a problem, troubleshoot and reset it.

　　 Fourth, the cross-folding part is clogged, check whether the cross-folding part is clogged, remove and reset.

　　 Five, photoelectric switch failure, check whether the position of each photoelectric switch is correct or damaged, adjust or replace.

　　 6. The fabric is not folded after the first horizontal fold. If the function switch is incorrectly selected, adjust the function switch. If the solenoid valve for blowing air is not opened, open the solenoid valve. If the fabric exceeds the maximum folding range or is less than the minimum folding range. Check whether the fabric is laid flat during ironing, and whether the debris is piled up when entering the front operating table of the folding machine, resulting in a reduction in size. If the speed of the folding machine and the ironing machine do not match, adjust the speed of the folding machine and the ironing machine.

　　 Seven. The fabric is not folded after the second horizontal fold. If the program parameters are incorrect, you can only rewrite the program parameters. If the fabric is too thick, too thin or too heavy, then ironing these fabrics is not recommended.

　　 The content of the analysis on the reasons why the folding machine does not fold is here. Various problems may occur during or before the use of the folding machine. The solution can be dealt with by the manufacturer or an experienced technician. You can contact our customer service if you need to buy a mask folding machine.