Recently, some netizens have asked about the difference between the operating steps of the mask machine and the linen machine. The mask folding machine and the linen machine are essentially different. There are many types of linen machines, including dehydration machines and folding machines. The mask machines are divided into filling machines and folding machines. machine. Although the two are not much different in folding machine technology, the two are not comparable. The following editor explains the operating steps of the linen folding machine.

　　Linen folding machine operation steps:

　　1. Put the items to be dehydrated into the dehydration drum, paying attention to evenly placing them.

　　2. The linen dehydrator motor should be kept dry. Industrial dehydrator, washing equipment.

　　3. Turn off the power and operate the brake handle intermittently to gradually brake the spinning dehydration drum. Note: Do not brake the drum at once to extend the service life of the brake.

　　4. The shell of the linen dehydrator should be kept clean at all times. Try to wipe the shell with a soft cloth. If possible, wax the protective layer frequently. Industrial dehydrator, washing equipment.

　　5. If it is not used for a long time, the linen dehydrator should be kept dry and kept in good condition. It must be carefully checked when reused and can be used only after it is qualified.

　　6. During use, any damaged parts should be repaired or replaced in time. After using this machine for half a year, all components should be thoroughly inspected. Industrial dehydrator, washing equipment.

　　7. The bearings of the linen dehydrator should be lubricated frequently. Nano-based grease can be used. The grease should be injected from the nozzle with a grease gun. The grease should be strictly checked and must not contain any other impurities.

　　 8. Note that the brake must be released before turning on dehydration.

　　 9. The linen dehydrator is connected to the power supply and dehydrated for two to three minutes. Pay attention to the evenness. Industrial dehydrator, washing equipment

　　10. Turn on the power supply and run it for a trial run. The direction of rotation should be clockwise (reverse rotation is strictly prohibited), no abnormal noise, no violent vibration, after normal operation, turn off the power supply and brake intermittently to gradually brake the rotating dehydration drum. Please clean the drum before use.

　　11. To filter the suspension and dewater small parts, the drum should be lined with a filter as the case may be. Industrial dehydrator, washing equipment

　　12. After each use, drain the linen dehydrator waste water, and rinse the drum with a proper amount of water to prevent harmful substances from corroding the drum and dehydrator to extend the life of the machine.

　　 What is the difference between the operating steps of the mask machine and the linen machine? This is the content. When we choose the folding machine, we might as well add the exact name of the item that needs to be folded, so that we can find the folding machine we need.